Buffer air lock

product description:

　　The buffer air lock device has four types for each bandwidth according to the process layout and use requirements: A type, AB type, AB type, and T type. There are 9 kinds of bandwidths from 500 mm to 2000 mm, a total of 36 specifications. It is installed at the end of the coal falling pipe, and sometimes in the middle of the falling pipe. This equipment is used in the transportation system of mining, building materials, electric power, coal, docks and other industries.

working principle:

　　The working principle of this equipment is to make the material with high falling speed be buffered and decelerated on the diversion buffer air lock baffle, and use the weight of the falling material to open the closed diversion buffer air lock baffle to make the material smooth Pass, and the induced wind is basically blocked, thus playing the role of air lock; due to the barrier of the air lock baffle, the impact of falling materials can be slowed; at the same time, the materials can be delivered to the middle part of the lower conveyor belt very uniform Played the role of diversion.

Main feature:

1. This equipment is simple in structure, easy to manufacture and install, has the least amount of maintenance, and prevents malignant accidents such as tearing the tape.
2. Redistribute the materials evenly, prevent the tape from deviating and have the function of diversion, to avoid clogging and spilling.
3. Reduce the induced air volume, which can be reduced to less than 1/10 of the original.
4. It can be used to transport sticky materials, wet materials and block materials to prevent sticking and blocking snakes.
5. Reasonable design and large buffer torque can reduce system noise. Easy installation and low maintenance.