EBT

(1) Reduction of the angle of tapping;
(2) Simplify the tilting structure of the electric furnace;
(3)Reduce the copper busbar system impedance and increase life ofthe furnace;
(4) Retaining hot steel for slag operation;
(5) No slag tapping, improve the quality of steel, is conducive torefining operations:
(6)Hot heel & retain slag, is conducive to electric furnace treatment,energy conservation;
(7)Reduce the tapping temperature, save power consumption:(8)Reduce secondary oxidation and improve steel quality: increaseladle life;

EBT(Excentric bottom tapping) electric arc furnace
An electric arc furnace(EAF) is a furnace that heats charged material by means of an electric arc. Arc furnaces differfrom induction furnaces in that the charge material is directly exposed to an electric arc and the current in the furnaceterminals passes through the charged material.

Arc furnace provides a simple and effective way of melting various grades of scrap and then going ahead to refine themetal to desired specification. lt is also useful in making all kinds of steels including tool steels and alloy steels. Thisprovides a method of utilizing low cost scrap, which is available in abundance. The key advantage in EAF melting is thatrefining is possible and you can also produce low carbon steels.
 

Main parameter of electric arc furnace (EBT)

A typical 100t EBT furnace constructed by ZBTECH with mature design & stable quality, An electric arc furnace ismainly used for making steel and consist of devices like refractory-lined upper & lower shell water-cooled roof, powercable, secondary circuit system, electrode raising & nippling system, roof raise & lower mechanism, ifting column, ladle,ladle car, water-cooling system, air compressed system, hydraulic system, lance system, H.v, L.Vv, auto control &
computer system.
The tapping operation of the EBT electric arc furnace.When tapping, about 5° tilting to the tapping side, the tappingmechanism is opened, and the tapping filler automatically falls under the static pressure of the molten steel, and themolten steel flows into the ladle to realize automatic pouring and tapping . When the molten steel reaches about 95% ofthe required water, it will quickly recline to prevent the slag. In the back-dumping process, about 5% of the molten steeland a little slag will flow into the ladle. After the furnace is shaken, the steel is left in the furnace by 10% to 15%.Slag≥95%) Inspection and maintenance of the steel tap, closing the taphole, adding filler, loading scrap,re-arcing smelting.